Harley Davidson Security System Reset
Easy Steps to Reset Your Harley Davidson Security System

Have trouble with your Harley Davidson security system? Learn how to reset it in simple steps!

Why You Might Need to Reset

Sometimes your bike’s alarm needs a fresh start. This could be because:

  • You changed your bike’s battery.
  • The alarm keeps going off for no reason.
  • You want to sell your bike to someone else.
Harley Davidson Security System Reset

Credit: m.youtube.com

What You Will Need

Before you start, make sure you have these:

  • Your bike’s key fob.
  • The PIN code for your bike.
  • A quiet place to work on your bike.
Harley Davidson Security System Reset

Credit: www.hdforums.com


Step-by-Step Reset Guide

  1. Turn on the ignition. Use your key to turn it on.
  2. Enter your PIN code. Use the left turn signal. This is like your bike’s “password”.
  3. Press and hold the turn signal. Do this until you see ‘Enter PIN’ on the display.
  4. Push the right turn signal. This picks the number. One push means ‘1’.
  5. Press the left turn signal. It moves you to the next number spot.
  6. Repeat until your whole PIN is entered. Be careful to get it right!
  7. Confirm your PIN. Push and hold the left turn signal. Do this until the security light turns off.
  8. Test your system. Turn off and on the bike to make sure it works!

Things to Remember

A few important points to remember:

  • Never share your PIN with strangers.
  • Write down your PIN and keep it in a safe place.
  • If you forget your PIN, a dealer can help you.

Troubleshooting Tips

Problem Solution
Bike doesn’t recognize the PIN Check if you entered the right PIN. Try again.
Security light stays on Wait for a minute. If it stays on, check your manual.
Key fob isn’t working Change the fob’s battery or get closer to the bike.

Keeping Your Bike Safe

After resetting, take these steps to keep your bike secure:

  • Always lock your handlebar.
  • Use a strong chain and lock when you park.
  • Park your bike in a well-lit area.

Frequently Asked Questions On Harley Davidson Security System Reset

How To Reset Harley Security System?

To reset a Harley Davidson security system, turn the ignition to “Off,” then “On,” press the left turn signal switch twice, and enter your security PIN.

Where Is Harley Security System Pin Located?

Your Harley’s security system PIN is usually provided with your owner’s manual, or you can obtain it from an authorized dealership.

Can Harley Security System Drain The Battery?

Yes, a Harley’s security system can cause battery drain if the motorcycle is left undisturbed for extended periods.

Steps For Disabling Harley Alarm?

Disabling a Harley alarm involves turning the ignition to the “Off” position and immediately pressing the left turn signal switch twice.

Also Worth Reading:

jose m santana

Hey there, I'm Jose M. Santana—a passionate rider and devoted aficionado of the legendary Harley Davidson heritage. My love for the open road and the unmistakable rumble of the Harley engine has fueled my life's journey. With years spent embracing the ethos of this iconic brand, I've immersed myself in its culture, unraveled its history, and savored every moment astride these incredible machines. For me, it's not just about riding; it's about embodying the essence of Harley Davidson—the camaraderie, the freedom, and the sheer thrill of the ride. Through my writing, I aim to connect with fellow riders and enthusiasts globally, sharing insights, stories, and tips that resonate with our shared passion for the exhilarating universe of Harley Davidson.

Similar Posts