HINT: Disabling your Harley’s security system should be done with care!
Why Disable Your Harley’s Security System?
Sometimes, you might need to turn off the security system of your bike.
- Maybe you lost your key fob.
- It could be that your battery is dead.
- Or, you just want to work on your motorcycle.
Step-By-Step Guide to Disable the Security
Follow these steps, and you can disable the system safely.
- Stay Safe: Always make sure you’re in a safe spot to work.
- Key Fob: If you have it, keep it away from the bike.
- Ignition: Turn the ignition to the OFF position.
- Run-Stop: Switch the run-stop switch to RUN.
- Turn Signal: Press the left turn signal twice.
- Acc: Turn the ignition to ACC (Accessory).
- Signal Again: Press the left turn signal one more time.
- Enter PIN: Use the turn signals to input your PIN.
- Confirm: Press the right turn signal to confirm your PIN.
- Start: Now, start your bike as you normally would.
Credit: m.youtube.com
Vital Points to Remember
Be careful and remember these things:
- Always remember or write down your PIN code.
- Never disable the system in a public or unsafe place.
- Do not forget to reactivate your security system later.
Troubleshooting Tips
If you have trouble, try these tips:
- Check your bike’s battery; it might be too weak.
- Make sure you press the buttons firmly.
- Reread the steps, you might have missed one.
Credit: www.capitolhd.com
Frequently Asked Questions
| Question | Answer |
|---|---|
| Can I ride without a key fob? | Yes, but you must enter the PIN to start the engine. |
| Is disabling the security safe? | It’s safe if done correctly and reactivated later. |
| Can I change my PIN? | Yes, the dealership or manual can show you how. |
Frequently Asked Questions On Harley Davidson Security System Disable
How To Disable Harley Davidson Security System?
To disable the Harley Davidson security system, turn the motorcycle ignition to “Off” and then hold both turn signal buttons simultaneously for a few seconds until the security lamp goes out.
Can I Bypass Harley Security Without Key Fob?
Bypassing the security system without the key fob is not recommended as it may violate the terms of your warranty and compromises the bike’s security.
What Triggers Harley Davidson Alarm System?
The Harley Davidson alarm system is triggered by unauthorized movements or attempts to start the motorcycle without the key fob present.
Will Removing Battery Reset Harley Security?
Removing the battery will not reset the Harley security system; it retains its settings to prevent tampering and theft.
Conclusion
Disabling a Harley’s security system is easy if you know the steps.
Just be careful, remember your PIN, and stay safe! Ride on!
Also Worth Reading:
- 2008 Harley Davidson Ultra Classic Rear Tire Size
- 2008 Harley Davidson Ultra Classic Specs
- Harley Davidson 3 Hole Oil Change Cost
- Harley Davidson Barrel Key Replacement
- Harley Davidson Battery Not Charging
- Harley Davidson Crank Position Sensor Symptoms
- Harley Davidson Drive Belt Replacement Cost
- 2007 Street Glide Rear Tire Size
- 2008 Harley Ultra Classic Specs
- 2008 Street Glide Oil Capacity
