How to Test Crankshaft Position Sensor

Does your car have trouble starting? It might be the crankshaft position sensor. This part is important for your car’s engine to work. It tells your car’s computer how the engine is doing. If it breaks, your car might not start.

Today, we’ll learn how to test it. You can check this part at home with easy steps. You can use some simple tools. Let’s find out if this sensor is good or bad.

Step 1: Gather Your Tools

First, let’s look at what you will need:

• A multimeter (a tool to measure electricity)
• Your car’s manual (a book about your car)
• A helper (someone to help you)

Step 2: Find the Sensor

Now, you should find where the sensor is.

1. Open your car’s manual.
2. Look for a section about the engine.
3. Find where it talks about the crankshaft position sensor.
4. Open your car’s hood and look for the sensor.

Note: It’s usually near the engine’s bottom or on the side.

Credit: m.youtube.com

Step 3: Check the Sensor

We will now start testing the sensor.

1. Make sure the engine is off and cool.
2. Disconnect the sensor’s wire.
3. Set the multimeter to the right setting.
4. Connect the multimeter’s wires to the sensor’s pins.

Tip: Your car’s manual will tell you which pins to use.

Step 4: Read the Multimeter

Now, let’s learn what the numbers mean. The multimeter will show you volts.

If it reads around 0.5 volts when you start the engine, it’s good. If it reads less or nothing, your sensor might be bad.

Credit: www.samarins.com

Step 5: What to Do Next

If your test shows the sensor is good, that’s great! If not, you can try cleaning it. If it’s still not good, you might need a new one.

Always ask an adult or a professional if you need help.