Harley Davidson motorcycles are known for their power and road presence. Many use a system called Throttle by Wire (TBW). This article will look at common TBW problems and their solutions.
What is Throttle by Wire?
Throttle by Wire removes the usual cables between the throttle and engine. Instead, it uses electronic signals to control the throttle. This system is now common in many Harley Davidson bikes.
Common TBW Issues
Owners have reported problems with TBW. Below are the most common issues.
- Grip Lag: A delay when you twist the throttle.
- Sticky Throttle: The throttle does not move smoothly.
- Failure to Respond: The motor does not respond to the throttle.
- Throttle Error Codes: The bike’s system shows warning codes.
Credit: www.hdforums.com
Diagnosing TBW Problems
Here is a guide to help find TBW issues.
- Check for any error codes on the dashboard.
- Ensure the battery is fully charged.
- Look at the wiring harness for signs of wear.
- See if the throttle sensor is working right.
Solving TBW Problems
Solving these problems can be done at home, with attention to detail.
Problem | Solution |
---|---|
Grip Lag | Ensure the throttle sensor is calibrated correctly. |
Sticky Throttle | Clean the throttle grip area. |
Failure to Respond | Check the electrical connection to the throttle. |
Throttle Error Codes | Refer to the manual to understand the specific code. |
Credit: m.youtube.com
Preventing Future TBW Issues
Maintaining your bike helps avoid these throttle problems.
- Keep the throttle area clean and lubricated.
- Check the battery’s condition regularly.
- Inspect the wiring for damage or corrosion often.
- Have regular service check-ups.
Troubleshooting Guide
If you face a TBW issue, this step-by-step guide can help.
Step | Action |
---|---|
1 | Look for error messages on the dashboard. |
2 | Charge your motorcycle’s battery. |
3 | Check the wiring and connections. |
4 | Test the throttle sensor for faults. |
5 | Perform a throttle reset or recalibration. |
6 | Contact a professional if needed. |
When to Seek Professional Help
Sometimes, it’s best to reach out to the experts.
- If you’re not sure about diagnosing the issue yourself.
- When your solutions do not solve the throttle problem.
- If the TBW system has complex electronic faults.
Frequently Asked Questions For Harley Davidson Throttle By Wire Problems
What Causes Harley Throttle By Wire Issues?
The throttle by wire system can experience problems due to faulty wiring, sensor failures, software glitches, or corrosion.
How To Diagnose Harley Wire Throttle Problems?
A diagnostic code reader helps identify error codes, while physical inspection checks for wiring damage or sensor issues.
Can I Fix Throttle By Wire Issues Myself?
Some issues, like loose connections, can be fixed at home, but complex electrical problems may require professional repair.
What Are Common Throttle By Wire Symptoms?
Symptoms include erratic throttle response, engine stalling, warning lights on the dashboard, and reduced power output.
Conclusion
Harley Davidson’s Throttle by Wire can have issues. But with the right knowledge, you can solve them. Remember, if in doubt, it’s always safe to ask for professional advice.