To disable EITMS on a Harley, start the engine and then press and hold the trip switch for five seconds. The dashboard will display the EITMS status, allowing you to toggle it on or off.
Harley-Davidson motorcycles come equipped with the Engine Idle Temperature Management System (EITMS), designed to reduce engine heat when the bike is idling, especially in warmer climates. For riders who want complete control over their motorcycle’s features or face colder environments where the system may not be needed, knowing how to disable EITMS is crucial.
It’s a simple process that riders can perform without tools or a trip to the mechanic. Understanding EITMS and its functionality is part of maintaining an optimal riding experience on your Harley-Davidson, ensuring both comfort and performance are tailored to the rider’s preferences.
Introduction To Eitms In Harley-davidson Motorcycles
The Engine Idle Temperature Management System, or EITMS, is key for Harley-Davidson motorcycles. This system helps manage engine temperature during idle. It turns off the fuel to specific cylinders, which lets the engine cool.
EITMS plays a big role in keeping the engine healthy. It ensures the motor does not get too hot when the bike is not moving. Yet, there are times a rider might choose to turn off EITMS. For instance, in cooler weather, turning it off could give a smoother ride. Riders may also disable it during specific performance situations where a constant engine idle is needed.
Preparatory Steps Before Disabling Eitms
Before disabling EITMS on your Harley, safety is paramount. Always ensure the motorcycle is switched off and cooled down. Working in a well-ventilated area prevents inhaling fumes. Securely park the bike to prevent it from tipping over. Gather necessary tools—a diagnostic scanner or a motorcycle’s specific manual. Protective gloves and eyewear are crucial. The EITMS enable/disable switch is often found in the motorcycle’s menu options. Accessing the menu varies per model, so refer to the manufacturer’s guide. Read instructions thoroughly before making changes to your bike’s system.
Step-by-step Guide To Disabling Eitms On Harley
To disable EITMS (Engine Idle Temperature Management System) on your Harley, you’ll need to begin by accessing the motorcycle’s diagnostic mode. Power up your Harley and press both the turn signal switches simultaneously. Hold them until you see the diagnostic menu on the dashboard.
Next, use the left turn signal to navigate through the menu. Look for the option labeled “EITMS” or similar. Once located, toggle the setting using the right turn signal switch. You want to change the setting to ‘Disabled’. Confirm this choice to ensure EITMS won’t manage your engine idle heat anymore.
Finally, exit the diagnostic mode safely. Hold the turn signal switches again or turn off and restart your bike. By following these steps, you’ve successfully turned off the EITMS on your Harley. Ride on with full control over your engine’s temperature.
Credit: www.reddit.com
Post-disabling Considerations And Troubleshooting
Monitoring your Harley’s performance after disabling EITMS is essential. Ensure the bike runs smoothly and maintains optimal temperature levels. Regular checks will help spot any irregularities early.
Disabling EITMS may lead to varied engine behavior. Be aware of potential overheating and fuel efficiency shifts. It’s wise to note any changes in your ride’s performance.
Common issues might arise post-EITMS disablement. Should any problems appear, a thorough inspection is crucial. Pinpointing the source quickly is key to resolution. Seek professional help if self-troubleshooting proves difficult.
When And How To Re-enable Eitms
Knowing when to switch EITMS back on is essential for your Harley-Davidson’s performance. Riding in cooler weather or during long journeys often requires the system’s reactivation. Regular checks of the bike’s temperature are important, as EITMS is beneficial when the engine runs hot. Make sure to reactivate EITMS after previous deactivation, especially when the prior reasons for disabling it no longer exist.
To re-activate EITMS on your Harley:
- Turn the motorcycle’s ignition to the ON position.
- Press and hold the throttle in the idle position.
- Turn the ignition switch to the OFF position and release the throttle.
- Wait for a few seconds.
- Restart your bike and EITMS will be active again.
To confirm if EITMS is active, look for the indication on your dash. The status can also be verified by noting the engine’s response in idle conditions. The system should show an active status when the motorcycle is stopped for a while with the engine running in higher temperatures.
Credit: www.reddit.com
Credit: m.youtube.com
Frequently Asked Questions Of How To Disable Eitms On Harley
What Does Eitms Do On Harley?
EITMS on Harley-Davidson motorcycles stands for Engine Idle Temperature Management System. It manages engine heat by temporarily shutting off the rear cylinder when idling in high temperatures.
Does Harley Have Cylinder Deactivation?
Yes, select Harley-Davidson motorcycles feature cylinder deactivation to reduce heat and improve comfort during idle.
What Is Eitms On A Harley-davidson?
Engine Idle Temperature Management System (EITMS) helps manage motorcycle engine heat by temporarily turning off the rear cylinder when idling. This is especially useful in warmer climates or heavy traffic situations to reduce heat felt by riders.
How Do You Deactivate The Eitms Feature?
To disable EITMS on a Harley, cycle the motorcycle power to off, then on. Next, hold the throttle in the full open position for a few seconds. The instrument cluster will display the EITMS status, confirming the feature is disabled.
Conclusion
Wrapping up, disabling EITMS on your Harley is straightforward with the right steps. It ensures your ride reflects personal performance preferences and adapts to climate needs. Remember, toggling this feature caters to your motorcycle’s response and feel, enhancing your overall experience.
Safe riding!
